Aquametrix IP100 Series Paddle Wheel Sensors - Manual

Features
• Low-friction, long-life jewel bearings
• Single moving part
• Six bladed impeller
• Fully field-repairable
• Choice of stainless steel or brass
• Integrated Tee and sensor
• Fits 1/2” to 8” pipe sizes
• Fixed depth in fitting ensures proper
placement in pipe
• High level signal can be sent up to
2000 feet
• Each fitting individually calibrated
and marked with K-factor (Pulses per
Gallon)
The IP100/200 series are adjustable depth insertion paddle-wheels
that come in brass or 316 stainless models to fit 3” to 48” pipe.
Installation fittings are standard 1-1/2” (101/201) NPT. Fittings such
as saddles and weldolets may be purchased either locally or from
AquaMetrix.
Ruby bearings and a non-drag Hall-effect sensor give these meters
the widest flow range of any of the paddle-wheel types. A sensor
detects the passage of miniature magnets in the six rotor blades.
The resulting square-wave signal can be sent for hundreds of feet
over unshielded cable without a transmitter and connected directly
to many PLC’s and other controls without any additional electronics.
The Shark-120/240 controller or SharkTX/P transmitter (loop pow-
ered) models provides digital rate and total display, as well as single
or dual 4 to 20 mA analog output.
Description
100 School Street
Andover, MA 01810
978-749-9949
www.WaterAnalytics.net
Applications
• Wastewater flow
• Water Treatment systems
• Irrigation
• Groundwater remediation
• Chemical Mixing
• Process cooling systems
• Neutralizaton Systems
• Process flow control
• Filtration systems
Model IP100/200 Series
Impeller Flow Sensor
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix