Aquametrix EX80 Series Magmeter Sensor - Manual

Features
•
Low-flow performance and
accuracy superior to any
mechanical flow sensor
•
No moving parts to wear out
•
Dedicated fittings for simplicity
•
Retainer clip automatically sets
correct depth
•
Meter extends only about 1/8 of
pipe diameter, minimizing potential
for clogging with debris
•
Easy to install and easy to maintain
EX80 series insertion electromagnetic flow meters are designed for use with
conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel,
brass, and PVC) allows the meter to adapt to a range of temperature, pres-
sure, and corrosive environments. Conductivity values of 20 µS/cm are suf-
ficient to enable the magmeter to operate which makes it suitable for all but
the ultrapure environment.
The EX80 is highly suitable for difficult applications with changing viscosities
and pulsating flows, such as air-driven diaphragm pumps. With no moving
parts, these meters can be used in “dirty” applications where debris would
foul a mechanical meter. Like all meters, when used in chemical injection
applications, they should be installed upstream of the chemical line (or far
enough downstream to allow complete mixing of fluids before the meter).
Designed for modularity and versatility, the EX80-Series has a current-sink-
ing pulse output that can be combined with the Shark controller or Shark TX
transmitter for the application. When used with the Shark the output signal
can be fed direct, with no other conditioning required.
EX80 series fixed depth insertion meters require special fittings. Factory
installation in the fitting ensures correct depth placement in the pipe. The
EX80 series meter can be ordered in a low power model that can run on an
external battery with solar panel. A hot tap version, reverse flow output and
immersibility are all available. Contact Water Analytics for information on
these and other options.
Description
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
wwww.WaterAnalytics.net
Applications
• Waste water flow
• Water Treatment systems
• Irrigation
• Groundwater remediation
• Chemical Mixing
• Process cooling systems
• Neutralizaton Systems
• Process flow control
• Filtration systems
Model EX80 Series
Magmeter Flow Sensor
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix