Aquametrix ES-1 Series Toroidal Conductivity Sensors - Manual

Features
• Low Maintenance - Reduced
cleaning requirements
• No electrode corrosion - Toroid is
fully encapsulated
• One Wetted Material - Easier
chemical compatibility
• Wide Measuring range
• Automatic Temperature
• Compensation
The AquaMetrix ES series toroidal conductivity sensors are used
in processes where conventional contacting sensors may become
fouled or corroded.
Each sensor comes standard with a PT1000 RTD temperature de-
vice, which provides automatic temperature compensation to 25°C
(77°F).
The AquaMetrix ES sensors can be mounted in flow through applica-
tions or submersion mounted in tanks or open vessels.
.
Operating Principle:
Toroidal conductivity sensors are made up of two-wire wound toroids
encapsulated in a potting compound and encased in a plastic body.
One toroid acts as a transmitter and the other as a receiver. An
electric current is induced between the toroids through the process
solution. This current is directly proportional to the conductivity of the
process solution.
Notes:
These sensors are made to interface with a third party analyzer. We
recommend the Knick Eco Stratos.
Description
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
Applications
• Plating
• High purity water applications
• Pharmaceutical Applications
• Reverse Osmosis systems
• Fume Scrubbers
• Boilers
• Cooling Towers
• Textile Manufacturing
• Food and Beverage
Model ES-1 Series
Toroidal Conductivity Sensors
Great Lakes
Replacement
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix