Aquametrix ES-5 Series Toroidal Conductivity Sensors - Manual

Features
• Loop powered 4-20 mA output
• Low Maintenance - Reduced
cleaning requirements
• No electrode corrosion - Toroid is
fully encapsulated
• One Wetted Material - Easier
chemical compatibility
• Choice of three Measuring range
• Automatic temperature compensa-
tion
The AquaMetrix ES-5 series toroidal conductivity sensors are used
in processes where conventional contacting sensors may become
fouled or corroded. These probes are unique in the marketplace.
They are loop-powered and provide direct 4-20 mA output.
Each sensor comes standard with a Pt100 RTD temperature device,
which provides automatic temperature compensation to 25°C (77°F).
The AquaMetrix ES-5 sensors are equipped with 1.5” MNPT threads
on both ends so that they can be mounted for in-flow applications or
submersion mounted in tanks or open vessels.
Operating Principle
Toroidal conductivity sensors are made up of two-wire wound toroids
encapsulated in a potting compound and encased in a plastic body.
One toroid acts as a transmitter and the other as a receiver. An
electric current is induced between the toroids through the process
solution. This current is directly proportional to the conductivity of the
process solution.
(The terms electrodeless and toroidal are interchangeable in regards
to this type of conductivity sensor.)
Description
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
Applications
• Plating
• High purity water applications
• Pharmaceutical Applications
• Reverse Osmosis systems
• Fume Scrubbers
• Boilers
• Cooling Towers
• Textile Manufacturing
• Food and Beverage
Model ES-5 Series
4-20 Direct Output Toroidal Conductivity Sensor by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix