Aquametrix SHARK-120/240 Controllers User Manual - Manual (Page 119)

Flow - Diagnostics Menu - Calibration Data 7.11 Page 117
S H A R K
MULTI-PARAMETER CONTROLLER & ANALYZER USER’S MANUAL
Flow - Diagnostics Menu - Calibration Data 7.11
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
RUN MODE
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
The Calibration Data menu is a read only screen which allow the
user to view the K factor entered during the last calibration.
This screen shows the K factor
entered during calibration.
Press to view the first
Calibration Data screen.
DOWN Press to return to the
Calibration Data menu.
CALIBRATION DATA
TOTAL 0
DIAGNOSTICS
CALIBRATION
UTILITIES
SETUP
FIRMWARE REV.
K FACTOR 125.00 >
CALIBRATION DATA