Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 85)

Stakeout Menu
85
5HVXOWV / 1(= : toggles the display between
Results and
Current Location .
6WRUH : prompts you for a point name and description and stores a
point for the current location.
Note: When Store GPS Raw Data on the Job | Settings | Measure
Mode card (Page R-8) is set to + BL,CV and/or + Rx. Raw tapping
6WRUH without first switching from ROVING to OCCUPYING will
store the point in Survey Pro only; no base line measurement or
receiver session will take place.
Slope Staking
6WDNHRXW 6ORSH 6WDNLQJ
The Slope Staking screen is used to locate the catch points for a
roadway in any terrain.
The first three and the last screens of this routine are similar to the
conventional method, except that the
%DFNVLJKW button is replaced
with a 6HWXS +5 button to configure rover antenna and the backsight
information is replaced with rover antenna height information. See
the conventional Reference Manual for details.
Once the centerline of the road is selected and the road profile is
defined, the fourth Slope Staking screen is used to locate the stake
point at the current station.