Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 18)

GPS Reference Manual
18
RTK Configurations
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« 57. &RQILJ
The RTK Configurations Settings card is used to configure automatic
connection when RTK base and rover receivers need to use different
COM ports and settings.
Auto connect RTK with saved configuration : is where
you turn on the automatic connection function. When
selected, this feature will switch to the receiver brand
and model and set the port settings to the saved
configuration.
Base : Displays the brand and model of the saved base
receiver configuration.
Connect Using : Displays the COM port settings for the
saved base receiver configuration.
6DYH FXUUHQW UHFHLYHU DV 57. %DVH : Saves the current
receiver and COM port settings as the RTK base. This
receiver will automatically be set when you tap Base
Setup in Survey Pro.
Rover : Displays the brand and model of the saved rover
receiver configuration.
6DYH FXUUHQW UHFHLYHU DV 57. 5RYHU : Saves the current receiver and
COM port settings as the RTK rover. This receiver will automatically
be set when you tap Rover Setup in Survey Pro.
Note: If you need to connect to a receiver different than the saved
configuration, you can un-check the Auto Connect control.