Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 14)

GPS Reference Manual
14
'HIDXOWV : sets all the fields to the default values.
5HFHLYHU 6HW : sets the baud rate on the chosen receiver port to the
selected value.
Note: This function requires that communication is already open
between the data collector and receiver. If communication is not
open, use
$XWR 'HWHFW first to get the current receiver communication
settings.
$XWR 'HWHFW : checks the receiver at all allowable baud rates to find
the current receiver communication settings. If this function
succeeds, Survey Pro is set to communicate at the baud found on the
receiver.
Base Modem Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« %DVH 0RGHP
The Base Modem Settings card is used to view and configure the
settings for the modem used with the base receiver.
Baud Rate : displays the baud rate the receiver will use
to communicate with the radio.
Parity : displays the parity the receiver will use to
communicate with the radio.
Serial Port : displays the serial port the receiver will use
to communicate with the radio.
&RQILJXUH 6HULDO : opens the Radio Communications
screen (Page R-15), where you can change the receiver
settings for radio communications.
Channel : displays the last radio channel when
applicable.
Sensitivity : displays the last radio sensitivity when
applicable.
Mode : displays the last radio base mode when applicable.