Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 13)

Job Menu
13
&KDQJH« : opens the Receiver Communications screen, where many
of the displayed communications settings can be changed.
Receiver Communication Screen
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV 5HFHLYHU &KDQJH
The Receiver Communication card is used to change the settings for
communication between the data collector and the receiver.
GPS Receiver Port : is where you select the serial port on
the receiver. ( Bluetooth can also be selected when using a
compatible total station for wireless communication
between the receiver and data collector.)
Note: See the conventional surveying User’s Manual for
more information on configuring Bluetooth with a
supported device.
Data Collector Port : is where you to select the serial port
on the data collector.
Baud Rate : is where you select the communication baud
rate.
Note: When you tap 2., the selected baud rate will only get set in
Survey Pro. To set the selected baud rate on the receiver, tap
5HFHLYHU 6HW.
Parity : is where you select the communication parity (if it is user
selectable).
Note: For receivers where parity is not user definable, this field
simply displays the default parity.
6HWWLQJV : (only available when using Bluetooth) accesses the
Bluetooth configuration screen that comes with the Bluetooth driver
software where you can quickly check or change the virtual COM port
and favorites.