Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual User Manual
Page 34
GPS Reference Manual
34
Errors
: displays the differences between the computed local
coordinates and the known coordinates for the control point.
Note: If the
Errors
are larger than the measurement precision of the
instrument, you probably have a problem with your projection
solution.
Epochs
: displays the number of epochs recorded since
the beginning of data collection.
Count Status
: displays
Measuring
when we are receiving
fresh coordinates from the receiver and updating the
screen with the latest measurement.
Averaging
is
displayed after you tap
$FFHSW while we average the
number of epochs specified in the
Epochs to Average on
Accept
field on the Measure Mode Settings screen (if this
value is greater than 1).
Suspended
is displayed if we
are not receiving valid data from the receiver or while
you are viewing a separate screen (like GPS Status).
*36 6WDWXV : stops the epoch counter and opens the GPS
Status screen (Page R-20).
$FFHSW : writes the results to raw data and returns you
to the Control Points screen.