Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 16)

GPS Reference Manual
16
However, not all radios support all of the described settings, so if you
do not see one of these fields, it is because the radio type does not
support it.
Pac Crest Radio Settings screen Trimble Radio Settings screen
Channel : is where you select the channel the radio will use to
communicate with the other radio.
Sensitivity : is where you select the sensitivity of the radio.
Mode : is where you select the base radio mode of the radio.
Baud : displays the baud rate the radio is currently set to.
Parity : displays the parity the radio is currently set to.
6HW : sends commands to the radio firmware to configure the settings
selected on this screen.
Note: some settings on the radio cannot be modified with Survey Pro.
To fully program the radio modems, you need to PC software that
should be supplied with the radio.