Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 42)

GPS Reference Manual
42
6ROYH /RFDOL]DWLRQ« : opens the Solve Localization screen, where the
control points can be selected and the horizontal and vertical
localization are solved.
Note: The Solve Localization screen will do any combination of
horizontal and vertical solution when launched from either the
horizontal or vertical card. Using the Solve Localization screen to
calculate a mapping plane zone localization is very similar to
computing a
Ground- TDS Localization solution. See the section on
Solving Localization for a description of this function (page 50).
Horizontal Mapping Plane Setup
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 6HOHFW =RQH«
Data Base : is where you select which records to choose.
You can:
•
View Zones: will display controls to pick a map
projection from the zone groups and zones in the
database.
•
View Sites: will display the entire zone-based sites in
the database.
Zone Group : is where you select the zone group of the
map projection zone.
Zone : is where you select the specific map projection
zone.
Datum : is where you view or select the horizontal datum
for this zone.
Note: Some zones in the database may not have a default datum
attached. In this case, the datum control is a list box and you must
select from the data base datums before you can set the zone.
Geoid : Displays the geoid model attached to this zone.
'HOHWH : Deletes the currently selected site or zone.