Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 17)

Job Menu
17
Rover Modem Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« 5RYHU 0RGHP
The Rover Modem Settings card is used to view and
configure the settings for the modem used with the rover
receiver. It is identical to the Base Modem card described
on Page R-14.
General Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« *HQHUDO
The General Settings card is used to configure additional
settings and to select any receiver-specific settings.
Elevation Cutoff : is where you set the minimum
elevation angle for using a satellite.
The available fields on this page are specific to the
selected receiver make and model. For further
information, see your receiver documentation.
6HW 5[ 7R 2)) PRGH: Disables all RTK operation (base
and rover) and puts the receiver into a standalone
autonomous position mode.
Note: This function is useful for some receivers that
have trouble communicating with radios during RTK
operation.