Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 25)

Survey Menu – RTK
25
Base Setup
6XUYH\ %DVH 6HWXS
The Base Setup screen is used to set the base point in Survey Pro and
to configure the receiver to begin broadcasting differential
corrections.
Note: If you are in Manual Mode , you can set the base in Survey Pro
for the purposes of doing GPS calculations without having to connect
to a receiver.
When you tap the Base Setup menu item, the Current
GPS Base Station information screen is displayed.
Base Point : displays the current base point name, if set.
Base:
•
Status : displays the status of the base.
•
Latitude : displays the current latitude of the base
point set in Survey Pro.
•
Longitude : displays the current longitude of the
base point set in Survey Pro.
•
Height : displays the current height of the base
point set in Survey Pro.
Antenna : displays information about the antenna if it is
available.
6HWXS : opens the Base Setup wizard where the base position can be
set and the receiver configured for RTK and post processing data
collection.
&OHDU : (visible only in
Manual Entry mode) clears the existing base
setup so you edit the point if necessary.