Spectra Precision Survey Pro 3.80 Recon GPS Reference Manual - Manual (Page 48)

GPS Reference Manual
48
Ground - TDS Localization
The Horizontal tab of the Projection screen is explained below for
when the horizontal projection type is set to
Ground - TDS Localization
in Job | Settings | Projection.
Status Line : The lines of text on the top of the screen
display the status of the horizontal projection solution.
If the localization is solved, the name of the site will be
displayed. Status of the solution will be one of:
•
Localization not Initialized : No default reference
stereographic projection has been setup.
•
Localization Initialized, not solved . A reference
stereographic map projection was set, usually by an
autonomous GPS base setup.
•
Localization Solved : A reference stereographic map
projection was set, and localization parameters were
solved using either control point measurements, a
localization calculator solution, or manual entry of
parameters.
6KRZ 'HWDLOV« : opens the Projection Details screen, where the
complete details of the localization solution, reference map projection,
and geoid model are displayed.
6ROYH /RFDOL]DWLRQ« : opens the Solve Localization wizard, where
control points can be selected and the horizontal and vertical
localization are solved.