Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 68)

Survey Pro Reference Manual
R-60
; Prompt for Layer : When checked, a prompt to select a layer will
appear before any new point is stored from any routine other than
those included in the Survey and Stakeout menus.
; Prompt for Attributes : When checked, a prompt to select feature
information will appear before any new point is stored from any
routine other than those included in the Survey and Stakeout menus.
This also requires that a feature file be selected from the Files
Settings card, described earlier.
; Prompt to Backup When Closing Job : When checked, a reminder
will open to backup the current job prior to closing it.
; Write Point Attributes to Raw Data : When checked, point
feature and attribute information will be written to the raw data file.
; Prompt for Elevation of 2D Cogo Pionts : when checked, a
majority of the COGO routines will prompt you for an elevation
before storing a 2D point. When unchecked, 2D points will be stored
without the prompt.
; Auto time stamp every ___ min : When checked, will store a note
record to the raw data file containing the current date and time each
time the specified number of minutes passes. This is useful for
tracking down when specific raw data records were written to the file.
; Remind to backup job every ___ hrs : When checked, will open a
reminder to backup the current job after every specified number of
hours passes.
; Log Serial Port Traffic : When checked, all serial port traffic will
be logged to a text file called TDS-Log.txt for troubleshooting
purposes and is stored in the Jobs folder. The file is automatically
overwritten when logging traffic on a date that is different from the
previous date.