Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 228)

Survey Pro Reference Manual
R-220
Solve Localization – Results
The Solve Localization Results screen is used to display the results of
the horizontal and vertical adjustment, and how the adjustment was
derived.
Horizontal Card
The Horizontal card shows results of the horizontal localization
solution.
Status
: displays the status of the current
horizontal solution. This will be one of the
following:
• Control points solution: is displayed
when the parameters were calculated
from the selected control points.
• Current horizontal site: is displayed
when there is a horizontal solution and
Solve H was not selected on this pass.
• No horizontal solution is displayed when
there is no horizontal solution in Ground- TDS Localization
mode. This happens when you tap Solve H, and no control
points are selected.
• Unadjusted
Mapping Plane
: is displayed in Mapping Plane
mode when there is a mapping plane zone selected, but no
horizontal adjustment is solved.
Scale
: displays the scale factor.
Rotation
: displays the rotation.
Delta N / E
: displays the horizontal shift from the centroid of the
control points on the intermediate map projection to the centroid of
the control points in the local coordinate system.
Origin N / E
: displays the coordinate origin of the localization control
points. This is the centroid of the control points on the intermediate
map projection.