Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 164)

Survey Pro Reference Manual
R-156
Record Mode
Survey Record Mode .
When running in Record Mode, all control of the total station is
performed from the total station’s keypad. The data collector will
simply log each shot that is taken from the total station.
This routine is typically used for topo work, where the total station
remains over a single occupy point during all shots.
Note: Not all total stations support record mode.
: is a shortcut to the Surveying Settings
screen (Page R-44).
Foresight: is the point name that will be used
when storing the next point. Once a point is
stored, it will be incremented to the next
available point.
Description: is the description for all the shots
that are stored.
HR: is the length of the rod.
: opens the Smart Target options (Page R-
456).
Start Recording : starts recording all shots performed from the total
station.
Stop : stops record mode.
Backsight… : opens the Backsight Setup screen (Page R-122) where
the current backsight can be modified.