Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 233)

Survey Menu – GPS Module
R-225
Key in Zone
Survey Projection Select Zone… Key in Zone > .
Key In Zone - Setup
The Key In Zone Setup screen is used to pick the zone and datum
type for the new zone, as well as set the azimuth orientation and grid
direction for the new zone.
Zone Type
: is where you select what kind of
map projection to use for the new zone. You
can choose:
• Transverse
Mercator.
• Lambert 1 Parallel
• Lambert 2 Parallel
• Stereographic / Oblique Stereographic
• Oblique Mercator Angle
Datum Type
: is where you select what kind of
datum to use for the new zone. You can choose:
• Pick from database. Choose this option to add a data base
datum and ellipsoid to the new zone
• Custom
Molodensky
. Choose this option to use a custom 3-
parameter datum transformation, with either a custom
ellipsoid or a data base ellipsoid.
• Custom
Similarity
. Choose this option to use a 7-parameter
datum transformation, with either a custom ellipsoid or a
data base ellipsoid.
Grid and Azimuth Parameters
: is where you select the grid azimuth
and the positive coordinate direction.
• North
Azimuth
: is where you set a north azimuth for your new
zone.
• South
Azimuth
: is where you set a south azimuth for your new
zone.