Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 245)

Survey Menu – GPS Module
R-237
Coordinate Type
: is where you select the type of coordinates being
entered (Grid, Local LLH, or WGS84 LLH). The selection made here
determines the format for the following three fields.
Latitude / North
: The Latitude / Northing of the control point source.
Longitude / East
: The Longitude / Easting of the control point source.
Height / Elevation
: The Height / Elevation of the control point source.
Next > : Re-starts the wizard if more control points need to be set,
or opens the final screen if all control points are set.
Review Results and Finish
The final screen of the wizard shows a preview of the control point
coordinates to be created. If there is only one point selected, the
Single Point Results page will open. If there are multiple points
selected, the Multiple Points Results page will be open.
Single Point Results
This page displays the values to be used to create the new GPS
control point.
New GPS Control Point to be Created
: This
shows the new NEE location for the selected
point, the existing LLH location, the existing
NEE location, and the deltas between the new
and old locations. This will also include data
sheet details if the control point source comes
from an NGS data sheet or an OPUS Solution
Report file.
Tap [Finish] to…
: determines what will occur
after tapping Finish from the following options:
• Automatically solve localization / calibration
• Open the solve localization/calibration wizard
• Solve the localization/calibration later
< Back: This opens a prompt asking if you want to reenter the control
source for the selected point. If Yes, the control point source is