Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 189)

Survey Menu – GPS Module
R-181
Position
The Position card displays your current position as well as your
course and speed information if you are moving. The Position card
will display one of three coordinates: WGS84 latitude, longitude,
height; Local latitude, longitude, height; or Grid north, east,
elevation.
Solution
: (see the Receiver card on Page R-
176.)
Latitude/Longitude/Height: or North/ East/
Elevation
: displays the location of the receiver.
Heading
: displays your course over ground if
you are moving. If your coordinate display is
geodetic, this heading is with respect to
geodetic north. If your coordinate display is
grid, then this heading is with respect to grid
north.
Speed
: displays your horizontal speed over ground if you are moving.
WGS84
: is where you set the position display to show WGS84
latitude, longitude, and height. This option is always available.
Local LLh
: is where you set the position display to show Local
latitude, longitude, and height. This option is only available when you
have a coordinate system selected and solved.
Note: Local LLh numbers make sense when in mapping plane mode.
When using Ground – TDS Localization mode, you should not use
Local LLh display.
Grid
: is where you set the position display to show Grid north, east,
and elevation. This option is only available when you have a
coordinate system selected and solved.