Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 358)

Survey Pro Reference Manual
R-350
3D View… : opens the 3D View screen (consult the conventional
surveying Reference manual) where a 3D view of the DTM can be
viewed from any angle as well as cut / fill information for the current
location.
Note: The 3D View… button is only available when Generate TIN
w\Staked Points
is checked in the previous screen and at least three
stake points have been stored.
Store : stores a point at the current rover location with the point
name shown in the St Pt field and the description in the Desc field.
Also advances the St Pt to the next available point name.
St Pt
: is the point name that will be assigned to the next stored point.
Desc
: is the description that will be assigned to the next stored point.
HR
: is the height of the rod.
Data
: shows the northing, easting, and elevation of the current rover
location.
Result
: shows the computed elevation of the DTM at the current
location and the cut or fill necessary to bring the elevation at the
current location to the elevation of the DTM at the current location.