Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 292)

Survey Pro Reference Manual
R-284
Stake List of Points Screen
Stakeout Stake List of Points .
.
The Stake List of Points screen is used to stake points from a
specified list of points. Points can also be selected by description or
polyline.
: opens the Stakeout Settings screen (Page R-
50).
Tap Points… : displays a map of the current
job. Simply tap the points that you want to
stake and then tap .
To/From… : Opens the Point List screen (Page
R-449) where a point list can be created.
: Allows you to select points using a variety
of other methods including: select all points; all
control points; all non-control points; by
description; or by polyline.
Design Point: displays the point to be staked. The initial Design
Point
is the first point of the selected polyline or point range.
Change… : opens the Edit Point List screen where the current point
list can be edited.
Increment: is the number of points to advance from the Design Point
after tapping Next Point > . (A negative integer can be entered to
have point numbers advance in descending order.)
Height of Rod: is the length of the rod.
Next Point > : Advances the Design Point by the Increment and
automatically solves to open the Stake List of Points screen where
you can begin staking the point. The points are advanced in the same
order that they were defined when the polyline was created or when
the point range was defined.
Backsight… : opens the Backsight Setup screen (Page R-122).