Spectra Precision Survey Pro v4.6 Ranger Reference Manual - Manual (Page 123)

Job Menu – Basic GPS Module
R-115
Change Settings
Job Settings Connections Change Settings .
The Change Settings screen can be used to
quickly switch the base/rover receiver between
serial and Bluetooth and access other
Bluetooth tools.
Windows Bluetooth Settings : Opens the
Windows Bluetooth Settings screen where
Bluetooth devices can be configured. You will
typically only use this screen when configuring
a Bluetooth cellular phone for Internet base
corrections as described in the Radio Settings
screen on Page 116.
Verify Bluetooth Choices : Opens the Verify Bluetooth Choices screen,
described below.
Verify Bluetooth Choices
Job Settings Connections Change Settings
Verify Bluetooth Choices
.
The Verify Bluetooth Choices screen performs
a scan to quickly verify that the Bluetooth
adaptors listed are connected to the
corresponding receivers, or if a serial cable is
connected. Be sure all receivers are powered
on with the appropriate Bluetooth dongle(s)
connected to Port 2 on the receiver(s) and any
serial cables are attached before starting the
scan.