Yokogawa GD40 Gas Density Detector - Manual (Page 31)

<2. Installation, Wiring and Piping>
2-8
IM 11T3E1-01E
2.2.4 Mounting the Converter
(1) Mounting the GD402G Converter
● Pipe Mounting
Converter
Bracket mounting screws
Bracket
Pipe mounting bracket
U-bolt
Stanchion(Ø60.5 mm pipe)
Washers (2 pcs)
Nut (2 pcs)
F0206.ai
Figure 2.6 Pipe Mounting
● Wall Mounting
Figure 2.3 shows how to mount the converter on a wall.
Converter
Mounting hole (3 places)
Bracket
M8 bolts (not supplied)
Provide bolts of a length suitable
for the mounting holes.
F0207.ai
Note: The converter for wall
mounting comes with the same
mounting hardware as that of a
pipe-mounting model.
When installing the converter on
a wall, use the bracket only.
70
35
102
144
Center of
the converter
3-M8 screw-hole or
3-Ø10 through-holes
Unit : mm
F0208.ai
Dimension of cutout for wall mounting
Figure 2.7 Wall Mounting