Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 109)

IM 11M12A01-05E 8-12
8.3.4 Default Values
When the analyzer is delivered, or if data are initialized, the alarm set values are by
default as shown in Table 8.7.
Table 8.7 Alarm Setting Default Values
T8.3.4.1.EPS
Set item Set value
Oxygen concentration high-high alarm setpoint 100% O
2
Oxygen concentration high-alarm setpoint 100% O
2
Oxygen concentration low-alarm setpoint 0% O
2
Oxygen concentration low-low alarm setpoint 0% O
2
Humidity high-high alarm setpoint 100% H
2
O
Humidity high-alarm setpoint 100% H
2
O
Humidity low-alarm setpoint 0% H
2
O
Humidity low-low alarm setpoint 0% H
2
O
Mixing ratio high-high alarm setpoint 1 kg/kg
Mixing ratio high-alarm setpoint 1 kg/kg
Mixing ratio low-alarm setpoint 0 kg/kg
Mixing ratio low-low alarm setpoint 0 kg/kg
Oxygen concentration hysteresis 0.1% O
2
Humidity hysteresis 0.1% H
2
O
Mixing ratio hysteresis 0.001 kg/kg
Delayed time 3 seconds
High-high alarm detection Not detected
High-alarm detection Not detected
Low-alarm detection Not detected
Low-low alarm detection Not detected