Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 96)

IM 11M13A01-02E
6-1
6. Components
6. Components
In this Chapter, the names and functions of components are described for the major
equipment of the EXAxt ZR Separate-type Explosionproof Zirconia Oxygen Analyzer.
6.1 ZR22S Detector
6.1.1 Explosionproof Detector (except for Model ZR22S-
ᮀ-015)
Probe
this part is inserted in the furnace.
Select length from 0.15, 0.4,
0.7, 1.0, 1.5 or 2.0 m.
Flange used to mount the detector.
Select from JIS or ANSI
standard models.
Washer (or plain washer)
Sensor (cell)
Filter
Screw
Probe Bolt
Pipe support U-shaped pipe
Metal O-ring
Flame arrester assembly
mounting screw
Contact
Calibration gas
pipe opening
Flame arrester assembly F6.1E.EPS
Figure 6.1 General-use Explosionproof Detector (standard type)