Watlow EZ-ZONE RMA Modul - Manual (Page 49)

Watlow EZ-ZONE ® RMA Module • 46 • Chapter 6 Features
Function Block Descriptions
Each of the next several pages graphically shows each of
the RMA function blocks. Note that as you view each you
will find text that is black and text that appears gray. The
gray text represents inputs that are not currently available
based on the functions defined use (red text). For instance,
when the defined use of the Ethernet IP Address Mode is
set to DHCP (where a DHCP host supplies the IP address)
all fields for the IP address will appear gray.
Backup / Restore Function
[StAt] Status : Off, Save, Restore,
Monitor, Complete, Error
[StAt] Status : None, OK, No Memory,
No Module, No Image, Error
[2onE] Current Zone : 1 to 16
[rESt] Restore : Off, Now, Change
Backup
Overview
Instances - 1 per RMA
Save
Restore
[SAuE] Save : Off, Now
[bCUP] Backup Menu
[`SEt] Setup Page
[bCUP] Backup Menu
[oPEr] Operation Page
[bStA] Backup Status
[oPEr] Operation Page
Status
Current Zone
Data Logging Function
Use Source Function A to activate logging.
Data Logging
Instances - 1 per RMA
Period
Full
Action
configured Log Point values
Status
Available Logging Memory
Available Logging Time
Source Function A
Source Instance A
Source Zone A
Source Error A
[SFn;A] Source Function A (Logging Enable) : None,
Alarm, Compare, Counter, Digital I/O, Profile
Event Out A to H, Function Key, Logic, Timer,
Variable
[S2;A] Source Zone A : 0 to 16
[Si;A] Source Instance A : 1 to 24
[StAt] Status : OK, No Memory, Paused
[A;ti] Available Logging Time : 0 to 9,999 hours
[F;Act] Full Action : Stop, Overwrite
[PErd] Period : 1 to 3,600 seconds
[dLog] Data Logging Menu
[`SEt] Setup Page
[dLog] Data Logging Menu
[oPEr] Operation Page
[a;me] Available Logging Memory : 0 to 9,999
Megabytes
Logging Point Function
Assign data points to log using Log Point Function
Block. Use Data Logging Function Block to start and
stop data logging to memory. The file format stored
on the SD card is comma delimited. If data point is
not accessible, data point is recorded as ‘stale’.
Error: None, Open, Shorted, Measurement Error,
Bad Cal Data, Ambient Error, Fail, Math Er-
ror, Not Sourced, Stale
[`S2;A] Source Zone A : 0 to 16
[`Si;A] Source Instance A : 1 to 24
Log Point Function Block
Overview
200 instances per RMA
Display Precision
[dLog] Data Logging Menu
[`SEt] Setup Page
Error
Source Function A
Source Instance A
Source Zone A
Source Error A
[perd] Display Precision : Source, Whole, Tenths,
Hundredths, Thousandths
[sfn;a] Source Function A : None, Analog Input,
Current, Cool Power, Heat Power, Power,
Linearization, Math, Process Value, Set
Point Closed, Set Point Open, Variable,
Alarm, Compare, Counter, Digital I/O,
Profile Event Out A to H, Function Key,
Limit, Logic, Special Function Output 1 to
4, Timer