Security setting menu – Watlow EZ-ZONE RMA Modul User Manual
Page 39

Watlow EZ-ZONE
®
RMA Module
•
36
•
Chapter 5 Factory Page
Access Module
•
Factory Page
Display
Parameter Name
Description
Range
Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data Type
& Read/
Write
[`LoC]
[FCty]
Security Setting Menu
[LoC;o]
[LoC.o]
Security Setting
Operations Page
Change the security level of the
Operations Page.
1 to 3
2
362
0x67 (103)
1
2
- - - -
3002
uint
RWE
[pas;e]
[PAS.E]
Security Setting
Password Enable
If set to on, a password is re-
quired to change security clear-
ance level or password.
[``on]
On (63)
[`off]
Off (62)
Off
- - - -
- - - -
- - - -
3015
uint
RWE
[rLoC]
[rLoC]
Security Setting
Read Lock
Set the read security clearance
level. The user can access the
selected level and all lower lev-
els when using an RUI.
If the Write Lockout Security level
is higher than the Read Lockout
Security, the Read Lockout Se-
curity level takes priority.
1 to 5
5
378
0x67 (103)
1
0x0A (10)
- - - -
3010
uint
RWE
[SLoC]
[SLoC]
Security Setting
Write Security
Set the write security clearance
level. The user can access the
selected level and all lower lev-
els when using an RUI.
If the Write Lockout Security level
is higher than the Read Lockout
Security, the Read Lockout Se-
curity level takes priority.
0 to 5
5
380
0x67 (103)
1
0x0B (11)
- - - -
3011
uint
RWE
[loC;l]
[LoC.L]
Security Setting
Locked Access Level
Determines user level menu vis-
ibility when security is enabled.
See Features section under Pass-
word Security.
1 to 5
5
- - - -
- - - -
- - - -
3016
uint
RWE
No Dis-
play
Security Setting
Locked State
Current level of security
Lock (228)
User (1684)
Admin (1685)
- - - -
- - - -
- - - -
- - - -
3023
uint
R
[roll]
[roLL]
Security Setting
Rolling Password
If set on, the password changes
each time the controller's power
is cycled. The Public Key is used
to determine the present pass-
word changes.
[``on]
On (63)
[`off]
Off (62)
Off
- - - -
- - - -
- - - -
3019
uint
RWE
[pas;u]
[PAS.u]
Security Setting
User Password
Set user password - Used to
acquire access to menus made
available through the
Locked Access Level setting.
10 to 999
63
- - - -
- - - -
- - - -
3017
uint
RWE
Note: Some values will be rounded off to fit in the four-character display . Full values
can be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EEPROM
S: User Set