Maple Systems MAPware-7000 - Manual (Page 25)

17 MAPware-7000 Ladder Logic Guide
1010-1041 rev. 00
Instruction 4- Rising Edge (Transitional Contact)
Expression:
Space Requirement: 1 line x 1 column Location Requirement: Left rail, Middle
Function:
When the input at last scan is OFF and the input at this scan is ON, the output is turned ON. This
instruction is used to detect the input changing from OFF to ON.
Execution Condition:
Input Operation Output
OFF Regardless of the input state at last scan. OFF
ON When the input state at last scan is OFF. ON
When the input state at last scan is ON. OFF
Operand:
No operand is required.
Example:
Timing Diagram:
Coil Y0002 comes ON for only 1 scan when the device X0000 comes ON.