Maple Systems MAPware-7000 - Manual (Page 10)

MAPware-7000 Ladder Logic Guide 2
1010-1041 rev. 00
Instruction Name Symbol Description Execution
Time (μSec)
Falling Edge
{input}
Turns ON output for 1 scan when input
changes from On→Off. 1 μsec
Inverter
{input}
Inverts the input state. 0.8 μsec
Invert Coil
{output}
Stores the inverse state of the input
going into coil. 1.1 μsec
Positive Pulse Contact
{input}
Turns ON output for 1 scan when input is
ON and Operand A changes from
Off→On. 1.3 μsec
Negative Pulse
Contact
{input}
Turns ON output for 1 scan when input is
ON and Operand A changes from
On→Off. 1.3 μsec
Positive Pulse Coil
{output}
Turns ON Operand A for 1 scan when
input changes from Off→On. 1.3 μsec
Negative Pulse Coil
{output}
Turns ON Operand A for 1 scan when
input changes from On→Off. 1.3 μsec
Data Transfer Instructions
These are instructions which can be used to move data from one (or more) memory location(s)
to another memory location(s).
Instruction Name Symbol Description Execution
Time (μSec)
MOV Word Transfer data from one 16-bit register to
another. 1.9 μsec
MOV DWord Transfer data from one 32-bit register to
another. 2.2 μsec
Invert Transfer Transfers an inverted version of the data
in one register (ex. 1→0, and 0→1) to 1.9 μsec