Maple Systems HMC7000 Series - Manual (Page 76)

HMC7000 Series I/O Module Guide
Phone: 425/745-3229 • Fax: 425/745-3429 • Email: [email protected] • www.maplesystems.com .
1010-1043 Page 75 of 85 Rev. 02, 11/08/2013
5. Select from the list box, the particular I/O expansion module installed in Slot 1 of the HMC7000.
When the checkbox to ‘Add tags for XW, YW, and MW’ is checked, MAPware-7000
automatically assigns tags to the Tag Database for the I/O module. The tags configured are based
upon the module and the slot location. Click OK.
6. In this example, Slot1 is identified with an IO module, along with a description and memory
address allocation. The tags are available in the Tag Database as seen below. These tags can be
used in the project to address the I/O.