Maple Systems HMC7000 Series - Manual (Page 24)

HMC7000 Series I/O Module Guide
Phone: 425/745-3229 • Fax: 425/745-3429 • Email: [email protected] • www.maplesystems.com .
1010-1043 Page 23 of 85 Rev. 02, 11/08/2013
HMC7-MIO-02 (8 Bidirectional Input, 8 Sourcing Output Digital Module)
This module is a digital input/output module for the HMC7000
Series models. It has eight bidirectional inputs and eight
sourcing digital outputs. Two inputs can be configured as high
speed counters (HSC) using the MW registers (see below).
When used as HSCs, input X0 (channel 1) and X5 (channel 2)
are used to record the incoming pulses.
Specifications:
Power 3.9 VDC from HMC7000 base
Approvals CE, UL
Digital Inputs 8 bidirectional inputs
Rated input voltage 24 VDC
Rated input current Up to 5mA
Input impedance 4.9K ohms
Minimum ON voltage 15 VDC
Maximum OFF voltage 5 VDC
Turn ON Time 10 msec
Turn OFF Time 10 msec
Isolation Optically isolated from internal circuit
Connection method Removable terminals (3.81 mm pitch)
High Speed Channels
No. of inputs 2 channels (X0 and X5)
Maximum Input Frequency 25 KHz
Maximum Input Count 4,294,967,295 (32-bit)
Digital Outputs 8 sourcing outputs (PNP-type)
Output Capacity 500mA per output maximum
Rated load 500mA @ 24VDC
Total output capacity 4A @ 24VDC
General
Operating Temperature 0 to 55°C
Operating Humidity 10% to 90% (non condensing)
Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm]