Teledyne LeCroy WaveLink Differential Probe Series (13-25 GHz) - Manual (Page 43)

Operator's Manual
WL-HBW-A-OM-E Rev B 37
Insert the probe body into the board edge clip and position the clamp as desired.
A
DHESIVE
B
ACKED
P
LATFORM
/C
ABLE
A
SSEMBLY
C
LAMPS
(4)
The Adhesive Backed Probe Body Clamp provides additional support to the Platform/Cable
Assembly and Interconnect Lead anywhere on the board under test.
Connection Guides
Probe connection guides are designed to make it easy to electrically isolate the two probe tips when
browsing. They also greatly reduce accidental and unwanted contact across probe points.
Before attaching connection guides, clean the PCA assembly area with IPA or another cleaner to
remove oils. Then, apply with a light pressure, release, and let set for one hour.