Teledyne LeCroy WaveLink Differential Probe Series (13-25 GHz) - Manual (Page 30)

WaveLink Series Differential Probe (13-25 GHz)
24 WL-HBW-A-OM-E Rev B
2. Bend the tips in toward the center. Make the bend as close to the resistor body as possible.
Bend them to about 60° from straight.
3. At this point, the leads can be bent out from their midpoints (making them parallel to each
other).
4. Perform a final check to ensure proper lead spacing and compare them to the trace spacing
on the PCB.