IAI America PCON-CFA - Manual (Page 15)

1. Overview
9
1. Overview
The open field network PROFIBUS-DP is a multi-bit, multi-vendor network for communication of both control and
data signals of the machine/line control level.
A wire-saving system can be built by connecting IAI’s X-SEL, TT, RCS-C, E-Con, SCON, ASEL, PSEL, SSEL,
ACON and PCON controllers (hereinafter collectively and individually referred to as “Each Controller”) to a
PROFIBUS-DP network.
Each controller is treated as a slave station in PROFIBUS-DP and can be used to exchange I/O data.
This Operation Manual covers the ACON, PCON, PCON-CA/CFA and SCON-CA series.
* For details on PROFIBUS-DP, refer to the operation manual for the programmable controller (hereinafter
referred to as “PLC”) in which the master unit is installed.
This operation manual should be used in conjunction with the operation manual for each controller.
You should also assume that any usage not specifically permitted in this operation manual is prohibited.
/'.
'%')%
/-'= =
= '/3
.
1 < ,
<
2> =
2> =
2> =
2>
=
2>
=
2>
=
2>
=
2>
=
2>
=
2>
=
2>
=
2>
=
2> =