IAI America RCS2-SD5N User Manual
Page 14
-8-
8. With short (RP5N/RN5N) actuators, do not directly move the actuator rod back and
forth without using a guide.
If the rod is moved back and forth directly without using a guide, the feed screw will receive an uneven load and
may bend or cause damage to the internal mechanism.
Warning: Do not directly move the actuator rod back and forth without using a guide. The feed screw will
receive an uneven load and may cause damage to the actuator.
9. With a low-lead type (lead: 2.5 mm), do not move the actuator back and forth by
forcibly pushing or pulling the rod side.
With a low-lead type, moving the actuator from the rod side generates strong resistance.
If the actuator is forcibly moved, the load applied to the feed screw may cause malfunction or damage. Use a
rotational tool (optional), etc., from the back side to turn the rotary shaft.