Ronan X11CA Software Manual - Manual (Page 34)

Rev 1.3 Series X11CA Computer Annunciators: X11CA Configuration Software User’s Manual
4. X11CA Software Operation
Hardware Control-© 2003 Ronan Engineering 30
2) Left-click in the Channel 1 area of the Channel Properties box to open
the Channel: 1 window.
Figure 4-16. Channel Properties Window with Default Values
? Sequence Type
There are twelve sequence types to
choose from. They are F1M-1, F1A-1,
F2M-1, F2A-1, F3A-1 F3M-1, A-1, A-
4, A-4-5-6, and M-1. Please refer to the
Sequence charts on the CD.
If the Serial Input box is checked, the
first-out sequence types, such as F1M-
1, F1A-1, F2M-1, F2A-1, F3A-1 F3M-
1 in the Sequence Type box become
unavailable.
Figure 4-17 Sequence Types
? Field Contact Time Delay
Set the time period that an alarm module
waits until it detects the response signal
from the field device.
Figure 4-18 FC Field Time
Delay