Teledyne 9060Z - Zirconium oxide flue gas oxygen analyzer - Manual (Page 37)

Model 9060Z Manual
37
The zero and span of the selected output are set in the following two menus (functions 11&12 and
14&15).
NOTE:
Regarding channel output configuration; both 4‐20mA channels are separately isolated and output
variables and scaling are individually configured for each channel.
In single probe mode both channel 1 and 2 have identical options, however when the analyzer is
configured as dual probe then channel 1 will output process variables relative to probe 1 and
channel 2 will output process variables relative to probe 2.