Teledyne 9060Z - Zirconium oxide flue gas oxygen analyzer - Manual (Page 14)

Model 9060Z Manual
14
3.2 OPERATIONAL SPECIFICATIONS
Range of outputs:
Function Minimum Maximum
Linear oxygen #1 0 to 1% 0 to 100% (**)
Very low oxygen #1 0 to 0.001% 0 to 2.000% (**)
Linear oxygen #2 0 to 1% 0 to 100% (**)
Very low oxygen #2 0 to 0.001% 0 to 2.000% (**)
Average oxygen 0 to 1% 0 to 100% (**)
Logarithmic oxygen 0.1 to 20% Fixed range
Reducing oxygen 0 to 1x10‐30% 0 to 100% (**)
Oxygen deficiency ‐10 to 0% ‐10 to 20% (**)
Aux temperature 0 to 100°C 0 to 1600°C
Combustibles 0 to 0.5% 0 to 2.0% (**)
Carbon dioxide 0 to 5% 0 to 100% (**)
Probe #1 sensor EMF 0 to 100mV 0 to 1500mV (Fixed zero)
Probe #2 sensor EMF 0 to 100mV 0 to 1500mV (Fixed zero)
Burner efficiency 0 to 20.0% 0 to 100.0% (**)
No output Disables the output
** (Adjustable zero)
Range of local indication:
0‐1% to 0‐100%
0.01 to 10,000ppm, automatically defaults to % range above
10,000ppm (1%)
Local display, lower line secondary display items:
Function Range
Probe #1 temperature Up to 1760°C (3200°F)
Probe #2 temperature Up to 1760°C (3200°F)
Probe #1 EMF ‐30 to 1350mV
Probe #2 EMF ‐30 to 1350mV
Probe #1 sensor impedance 0 to 300k Ω
Probe #2 sensor impedance 0 to 300k Ω
Oxygen probe #2 0‐1% to 0‐100%
Average oxygen, probe #1 and probe #2 0‐1% to 0‐100%
Aux temperature Up to 1760°C (3200°F)
Ambient temperature ‐20° to 70°C (‐5° to 125°F)
Ambient RH 5 to 95%
Carbon dioxide 0 to 2.0%
Combustibles 0 to 2.0%
Oxygen deficiency ‐10.0 to 20.0%
Burner efficiency 0 to 100.0%