Micromod MOD: 30MLTraining Manual - Manual (Page 55)

Training Manual
MOD 30ML Diagnostics Lab
page1
6 Press NXT to display the next event in
the queue.
Page 1 of the next event will be displayed next.
7 Use the block type and event code,
to locate the event description and
recommended action listed in
Section 7 of the Maintenance
manual. Pressing the DOWN arrow will display the time at
which the event occurred and line 6 will display the
nature of this event – in this example, the “INST IN
RUN
” is the event and it means that the instrument
was put in RUN mode. This is an information only
type event and line 6 displays “INFOONLY”
Figure 4 .2.
8 Press NXT to display the next event in
the queue.
Page 1 of the next event will be displayed next.
9 Use the block type and event code,
to locate the event description and
recommended action listed in
Section 7 of the Maintenance
manual. Pressing the DOWN arrow will display the time at
which the event occurred and line 6 will display the
nature of this event – in this example, the “INST IN
RUN
” is the event and it means that the instrument
was put in RUN mode. This is an information only
type event and line 6 displays “INFOONLY”
10 Continue using the NXT, Down, Up
sequence to view all the event data
in the queue.
11 Press the TAG key to return to the
DEVICE/EVENTS display.
4 - 3