Micromod MOD: 30MLTraining Manual - Manual (Page 208)

Training Manual
Supervisory Message Lab
D – DOWNLOAD TO THE CONTROLLER
1. Select an MSC block from the Algorithms window and place it
in the database
No configuration of this block is necessary
for this lab
2. Save your database
3. Compile the database and fix any reported errors. When your
database compiles properly, in the Interface File dialog window
check the first box under “Produce MIF” and type the name
SEQUENCE, then click OK.
4. Open the OPC server by clicking on the OPC Server icon on the
top toolbar
5. Make sure the correct Server Name, Server Node and Server are
selected
See the Extended Modbus OPC Server lab
for assistance
6. If you already have a Device configured, double-click to open
the Configuration menu. Make sure the Primary Port settings are
correct.
If you do not already have a device
configured see Chapter 4, Extended
Modbus OPC Server, for assistance
13 - 10