Controlled Products Systems Group STRONGARMPARK DC 10 - Manual (Page 32)

3-6 D0536 Rev. B StrongArmPark DC: Programming & Operations Manual www.hysecurity.com
User Menu Setting Options Menu Tasks & Explanations SDC Wire
Connections
DS 0 (OFF)
Diagnostic Logs
0 = off
1 = detailed Set to 0, the SDC logs pertinent operator events
such as faults, errors, or menu manipulation. When
experiencing intermittent problems, set this item to
1 to record all operator open and close events, in
addition to the normal alert, fault and error logs. This
parameter automatically resets to the default 0 (off)
after 24 hours. USB or RS-232 cable
and laptop computer
loaded with HySecurity
free S.T.A.R.T. software is
required to read the log
file.
Visit www.hysecurity.com
PD 0 
Set Password
0 = Off
1 = On, Set Password To enter a password (up to 80 characters) for
network connectivity, select 1. You can use the menu
navigation buttons to enter the password (SELECT,
NEXT, SELECT). When the password is set, the
display returns to the 0 setting.
NOTE: A System Address (SA) value in the Installer
Menu must be set before the Set Password display
can appear in the User Menu. Network: Ethernet or
RS-485
I
nstaller
m
enu
The Installer Menu options provide more advanced configurations for
the gate operators. Access to the Installer Menu is through the User
Menu. The navigational buttons are the same in both menu modes.
Access:
While a static Run Mode code is being displayed, press the MENU
button twice. (Bypasses the operator status displays.)
When the Close Timer display appears:
1. Access the Installer Menu by simultaneously pressing and hold-
ing the RESET and OPEN buttons.
2. Release both buttons and the Learn Limit display appears. The
LL display is the first item in the Installer Menu.
NOTE: Installer Menu options can also be configured through the use of a lap-
top computer and the S.T.A.R.T. software.
Table 2 describes the Installer Menu items and supplies the factory defaults. (Factory settings shown in bold.)
CT 0 (OFF)
CLOSE TIMER
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
LL 0 (OFF)
LEARN LIMIT
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT