Controlled Products Systems Group STRONGARMPARK DC 10 - Manual (Page 16)

Safety-6 D0536 Rev. B StrongArmParkDC: Programming & Operations Manual www.hysecurity.com
I
dentIfYIng
g
ate
o
perator
C
ategorY and
u
sage
C
lass
The StrongArmPark DC operator is approved for all the following classes and, according to UL 325 Safety Stan-
dards, falls in the Slide Gate and Vertical Barrier Arm category for gate operators. Its usage class is determined by
the area that the vehicular gate services.
Four different vehicular usage classes are defined by UL 325:
Class I
Class I: Intended for use in a location of one to four single family dwellings or a parking
area associated with one to four single family dwellings.
Class II
Class II: Intended for use in a commercial location or building such as a multi-family
housing units (five or more single family units) hotels, garages, retail stores or other
buildings servicing the general public.
Class III
Class III: Intended for use in an industrial location or building such as factories or
loading docks or other locations not intended to service the general public.
Class IV
Class IV: Intended for use in guarded industrial locations or buildings such as an airport
security area or other restricted access location, not servicing the general public, in
which access is monitored by security personnel or via closed circuitry.