ALLIED Vision Technologies Marlin F-201 - Manual (Page 48)

Camera interfaces
MARLIN Technical Manual V2.4.0
48
Camera interfaces
This chapter gives you detailed information on status LEDs, inputs and out-
puts, trigger features and transmission of data packets.
IEEE 1394a port pin assignment
The IEEE 1394a connector is designed for industrial use and has the following
pin assignment as per specification:
Note
L
For a detailed description of the camera interfaces
(FireWire, I/O connector), ordering numbers and operat-
ing instructions see the Hardware Installation Guide.
Read all Notes and Cautions in the Hardware Installation
Guide, before using any interfaces.
Figure 22: IEEE 1394a connector
Note
L
Cables with latching connectors on one or both sides can be
used and are available with various lengths of 4.5 m or up to
17.5 m. Ask your local dealer for more details.
Pin Signal
1 Cable power
2 Cable GND
3 TPB-
4 TPB+
5 TPA-
6 TPA+