ALLIED Vision Technologies Marlin F-201 - Manual (Page 12)

Introduction
MARLIN Technical Manual V2.4.0
12
continued from last page
2.4.0
[continued]
15.08.08
[continued]
• Moved detailed description of the camera interfaces
(FireWire, I/O connector), ordering numbers and operat-
ing instructions to the Hardware Installation Guide.
• Revised Chapter Description of the data path on page 65
• Revised Chapter Controlling image capture on page 113;
added Table 37: Trigger modi on page 113
• Revised Chapter Video formats, modes and bandwidth on
page 137
• Revised Chapter How does bandwidth affect the frame
rate? on page 166
• Revised Chapter Configuration of the camera on page 171
• Revised Chapter Firmware update on page 236
• Added Chapter Sensor position accuracy of AVT cameras on
page 237
• Revised Chapter Index on page 238
Changed provisions directive to 2004/108/EG in Chapter Decla-
rations of conformity on page 18
New measurement of minimum exposure time and therefore
also new offset values:
– Table 43: Camera-specific minimum exposure time on
page 121
– Table 44: Camera-specific minimum exposure time on
page 121
– Chapter Example Marlin F-033 on page 121
– Figure 67: Data flow and timing after end of exposure
on page 124
– Chapter Specifications on page 21
Added cross-reference from upload LUT to GPDATA_BUFFER in
Chapter
Loading an LUT into the camera on page 83.
Added cross-reference from upload/download shading image
to GPDATA_BUFFER in:
– Chapter Loading a shading image out of the camera on
page 89
– Chapter Loading a shading image into the camera on
page 90
Corrected: b/w and color Marlin cameras have IR cut filter
(except Marlin F-131BNIR: ASG) in Chapter
Specifications on
page 21ff.
to be continued on next page
Version Date Remarks
Table 1: Document history