ALLIED Vision Technologies Marlin F-201 - Manual (Page 131)

Controlling image capture
MARLIN Technical Manual V2.4.0
131
How is sequence mode implemented?
There is a FIFO (first in first out) memory for each of the IIDC v. 1.3 registers
listed above. The depth of each FIFO is fixed to 32(dez) complete sets. Func-
tionality is controlled by the following advanced registers.
Mode this registers can be modified...
All modes Cur_V_Mode, Cur_V_Format, ISO_Channel, ISO_Speed, Brightness,
White_Balance (color cameras only), Shutter, Gain, look-up table,
TestImage
Fixed modes only Cur_V_Frm_Rate
Format_7 only Image_Position, Image_Size, Color_Coding_ID, Byte_Per_Packet
Table 50: Registers to be modified within a sequence
Note
L
Sequence mode requires not only FW 3.03 but also special
care if changing image size, Color_Coding_ID and frame rate
related parameters. This is because these changes not only
affect settings in the camera but also require corresponding
settings in the receiving software in the PC.
Caution
a
Incorrect handling may lead to image corruption or loss of
subsequent images.
Please ask for detailed support if you want to use this
feature.
Register Name Field Bit Description
0xF1000220 SEQUENCE_CTRL Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..4] Reserved
AutoRewind [5]
ON_OFF [6] Enable/disable this feature
--- [7..15] Reserved
MaxLength [16..23] Max possible length of a sequence
(read only)
SeqLength [24..31] Length of the sequence (32 dez for
all CCD models)
Table 51: Advanced register: Sequence mode