ALLIED Vision Technologies Marlin F-201 - Manual (Page 176)

Configuration of the camera
MARLIN Technical Manual V2.4.0
176
And finally, the entry with key 40 (448h in this case) provides the offset for
the camera control register:
FFFF F0000000h + 3C0000h x 4 = FFFF F0F00000h
The base address of the camera control register is thus:
FFFF F0F00000h
The offset entered in the table always refers to the base address of
F0F00000h.
Offset 0-7 8-15 16-23 24-31
444h 00 03 7F 89
Unit dependent info 448h 40 3C 00 00
44Ch 81 00 00 02
450h 82 00 00 06
Table 85: Config ROM
Note
L
If you want to use the DirectControl program to read or write
to a register, enter the following value in the Address field:
F0F00000h + Offset