Stored settings – ALLIED Vision Technologies Marlin F-201 User Manual
Page 234
Configuration of the camera
MARLIN Technical Manual V2.4.0
234
Stored settings
The following table shows the settings stored inside a profile:
The user can specify which user profile will be loaded upon startup of the
camera.
This frees the user software from having to restore camera settings, that dif-
fer from default, after every startup. This can be especially helpful if third
party software is used which may not give easy access to certain advanced
features or may not provide efficient commands for quick writing of data
blocks into the camera.
Standard registers
Standard registers
(Format_7)
Advanced registers
Cur_V_Frm_Rate
Cur_V_Mode
Cur_V_Format
ISO_Channel
ISO_Speed
BRIGHTNESS
AUTO_EXPOSURE (Target grey level)
SHARPNESS
WHITE_BALANCE (+ auto on/off)
HUE (+ hue on)
SATURATION (+ saturation on)
GAMMA (+ gamma on)
SHUTTER (+ auto on/off)
GAIN
TRIGGER_MODE
TRIGGER_DELAY
ABS_GAIN
ABS_TRIGGER_DELAY
IMAGE_POSITION (AOI)
IMAGE_SIZE (AOI)
COLOR_CODING_ID
BYTES_PER_PACKET
TIMEBASE
EXTD_SHUTTER
IO_INP_CTRL
IO_OUTP_CTRL
IO_INTENA_DELAY
AUTOSHUTTER_CTRL
AUTOSHUTTER_LO
AUTOSHUTTER_HI
AUTOGAIN_CTRL
AUTOFNC_AOI (+ on/off)
COLOR_CORR (on/off)
TRIGGER_DELAY
MIRROR_IMAGE
HIGH_SNR
TIMESTAMP
LUT_CTRL (LutNo; ON_OFF is not saved)
LUT_DATA
Table 130: User profile: stored settings