Troubleshooting guide – B&K Precision 2542B-GEN - Manual User Manual
Page 221

Troubleshooting Guide
221
If the amplitude is not identical with the actual voltage
• Check that the attenuation factor of the probe is identical
with the attenuation factor set in the channel menu.
If instrument is not connected over LAN
• Try using DHCP if not already.
• Reboot the instrument, then try again.
How do I extract the deep memory from the DSO?
• This can only be extracted using provided PC software.
It cannot be exported directly to a connected front USB
flash drive.
This manual is related to the following products: